3D Printers Models - Revision history

Sjefferson99: Updated remote printing and prusa printer in taz3

2025-06-05T13:21:17Z

Updated remote printing and prusa printer in taz3

← Older revision		Revision as of 13:21, 5 June 2025
Line 30:		Line 30:
	*Print Volume: 280x280x250mm		*Print Volume: 280x280x250mm
	*Bed Surface: PEI		*Bed Surface: PEI
	*Nozzle size: 0.~~5mm~~		*Nozzle size: 1.2mm
	*Materials to print: PLA, ABS, PETG		*Materials to print: PLA, ABS, PETG
	*Enclosure for better printing of ABS and other environment temperature sensitive materials		*Enclosure for better printing of ABS and other environment temperature sensitive materials
Line 37:		Line 37:
	*Print with: direct from [[Printing with Cura\|Cura]], SDCard or [[Octoprint and OctoEverywhere\|Octoprint]]		*Print with: direct from [[Printing with Cura\|Cura]], SDCard or [[Octoprint and OctoEverywhere\|Octoprint]]
	*Status: Functional		*Status: Functional
	*~~has webcam~~ fitted for ~~print monitoring via~~ [[Octoprint and ~~OctoEverywhere\|Octoeverywhere~~]]		*Webcam fitted for use with [[Octoprint and Remote Printing]]
	[[File:Lulzbot Taz 6 E3D HS.jpg\|alt=SMI TAZ 02 with E3D hot end\|thumb\|320x320px\|SMI TAZ 02 with E3D hot end]]		[[File:Lulzbot Taz 6 E3D HS.jpg\|alt=SMI TAZ 02 with E3D hot end\|thumb\|320x320px\|SMI TAZ 02 with E3D hot end]]
	===SMI TAZ 02===		===SMI TAZ 02===
Line 44:		Line 44:
	*Materials to print: as per TAZ 01 and Flexible, abrasive or high temp		*Materials to print: as per TAZ 01 and Flexible, abrasive or high temp
	*Octoprint Address: http://taz2		*Octoprint Address: http://taz2
	*~~No webcam~~		*Webcam fitted for use with [[Octoprint and Remote Printing]]
	[[File:E3D head.jpg\|none\|thumb\|E3D hot end close up\|alt=\|315x315px]]		[[File:E3D head.jpg\|none\|thumb\|E3D hot end close up\|alt=\|315x315px]]
	[[File:SMI Taz 4 Lulzbot Taz 6.jpg\|alt=SMI TAZ 4. a standard Lulzbot TAZ 6\|thumb\|SMI TAZ 3 and 4 are both standard Lulzbot TAZ 6's]]		[[File:SMI Taz 4 Lulzbot Taz 6.jpg\|alt=SMI TAZ 4. a standard Lulzbot TAZ 6\|thumb\|SMI TAZ 3 and 4 are both standard Lulzbot TAZ 6's]]

	=== SMI TAZ 03 ===		=== SMI TAZ 03 ===
	~~As Per TAZ 01 except:~~		Prusa i3 MK3

	* Octoprint address: http://taz3		* Octoprint address: http://taz3
	* No Webcam		* Webcam fitted for use with [[Octoprint and Remote Printing]]

	===SMI TAZ 04===		===SMI TAZ 04===
Line 58:		Line 58:

	* Octoprint address: http://taz4		* Octoprint address: http://taz4
	* No Webcam		* Webcam fitted for use with [[Octoprint and Remote Printing]]

	[[File:Lulzbot Taz 3.jpg\|thumb\|300x300px\|alt=\|SMI TAZ 5]]		[[File:Lulzbot Taz 3.jpg\|thumb\|300x300px\|alt=\|SMI TAZ 5]]

Sjefferson99: Printer URLs

2024-12-29T13:45:40Z

Printer URLs

← Older revision		Revision as of 13:45, 29 December 2024
Line 8:		Line 8:
	* Nozzle size: 0.5mm		* Nozzle size: 0.5mm
	* Materials to print: PLA, ABS*, PETG		* Materials to print: PLA, ABS*, PETG
	* Octoprint address: http://~~octopi4~~ (ensure is attached/shared with SoMakeIt mini 2)		* Octoprint address: http://taz4 (ensure is attached/shared with SoMakeIt mini 2)
	* Slice with: [[Printing with Cura\|Cura]]		* Slice with: [[Printing with Cura\|Cura]]
	* Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]		* Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]
Line 19:		Line 19:
	*nozzle size: 0.5mm		*nozzle size: 0.5mm
	*materials to print: flexible filament, e.g. TPU and ninjaflex		*materials to print: flexible filament, e.g. TPU and ninjaflex
	*Octoprint address: http://~~octopi4~~ (ensure is attached/shared with SoMakeIt mini 1)		*Octoprint address: http://taz4 (ensure is attached/shared with SoMakeIt mini 1)
	*Slice with: [[Printing with Cura\|Cura]]		*Slice with: [[Printing with Cura\|Cura]]
	*Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]		*Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]
Line 33:		Line 33:
	*Materials to print: PLA, ABS, PETG		*Materials to print: PLA, ABS, PETG
	*Enclosure for better printing of ABS and other environment temperature sensitive materials		*Enclosure for better printing of ABS and other environment temperature sensitive materials
	*Octoprint address: http://~~octopi1~~		*Octoprint address: http://taz1
	*Slice with: [[Printing with Cura\|Cura]]		*Slice with: [[Printing with Cura\|Cura]]
	*Print with: direct from [[Printing with Cura\|Cura]], SDCard or [[Octoprint and OctoEverywhere\|Octoprint]]		*Print with: direct from [[Printing with Cura\|Cura]], SDCard or [[Octoprint and OctoEverywhere\|Octoprint]]
Line 43:		Line 43:
	*Nozzle size: 0.8mm Hardened steel		*Nozzle size: 0.8mm Hardened steel
	*Materials to print: as per TAZ 01 and Flexible, abrasive or high temp		*Materials to print: as per TAZ 01 and Flexible, abrasive or high temp
	*Octoprint Address: http://~~octopi2~~		*Octoprint Address: http://taz2
	*No webcam		*No webcam
	[[File:E3D head.jpg\|none\|thumb\|E3D hot end close up\|alt=\|315x315px]]		[[File:E3D head.jpg\|none\|thumb\|E3D hot end close up\|alt=\|315x315px]]
Line 51:		Line 51:
	As Per TAZ 01 except:		As Per TAZ 01 except:

	* Octoprint address: http://~~octopi3~~		* Octoprint address: http://taz3
	* No Webcam		* No Webcam

Line 57:		Line 57:
	As Per TAZ 01 except:		As Per TAZ 01 except:

	* Octoprint address: http://~~octopi4~~		* Octoprint address: http://taz4
	* No Webcam		* No Webcam

Abrugsch: /* SLA (Resin) Printer */ Added resin printer details

2023-02-22T11:26:43Z

SLA (Resin) Printer: Added resin printer details

@@ Line 78: / Line 78: @@
 === Elegoo Mars and wash/cure station ===
 ==ToDo==
 cerberus

Abrugsch: added section for resin printer

2023-02-22T10:39:54Z

added section for resin printer

← Older revision		Revision as of 10:39, 22 February 2023
Line 1:		Line 1:
	== Printer Models ==		== FDM Printer Models ==
	[[File:Lulzbot Mini Flexy.jpg\|320x320px\|thumb\|SoMakeItMini 2 with Flexystruder\|alt=]]		[[File:Lulzbot Mini Flexy.jpg\|320x320px\|thumb\|SoMakeItMini 2 with Flexystruder\|alt=]]
	=== SoMakeIt Mini 1 ===		=== SoMakeIt Mini 1 ===
Line 11:		Line 11:
	* Slice with: [[Printing with Cura\|Cura]]		* Slice with: [[Printing with Cura\|Cura]]
	* Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]		* Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]
	* Status: ~~Functional~~		* Status: Stored - Minis not in active use since arrival of resin printer

	=== SoMakeIt Mini 2 (flexystruder) ===		=== SoMakeIt Mini 2 (flexystruder) ===
Line 31:		Line 31:
	*Bed Surface: PEI		*Bed Surface: PEI
	*Nozzle size: 0.5mm		*Nozzle size: 0.5mm
	Materials to print: PLA, ABS, PETG		*Materials to print: PLA, ABS, PETG
			*Enclosure for better printing of ABS and other environment temperature sensitive materials
	*Octoprint address: http://octopi1		*Octoprint address: http://octopi1
	*Slice with: [[Printing with Cura\|Cura]]		*Slice with: [[Printing with Cura\|Cura]]
Line 72:		Line 73:
	*Print with: SDCard		*Print with: SDCard
	*Status: Functional [confirmation needed]		*Status: Functional [confirmation needed]


			== SLA (Resin) Printer ==

			=== Elegoo Mars and wash/cure station ===

	==ToDo==		==ToDo==
	cerberus		cerberus

Abrugsch: tweak to photo sizes and positions

2022-10-13T13:25:43Z

tweak to photo sizes and positions

← Older revision		Revision as of 13:25, 13 October 2022
Line 1:		Line 1:
	== Printer Models ==		== Printer Models ==
			[[File:Lulzbot Mini Flexy.jpg\|320x320px\|thumb\|SoMakeItMini 2 with Flexystruder\|alt=]]
	=== SoMakeIt Mini 1 ===		=== SoMakeIt Mini 1 ===

Line 14:		Line 14:

	=== SoMakeIt Mini 2 (flexystruder) ===		=== SoMakeIt Mini 2 (flexystruder) ===
	~~[[File:Lulzbot Mini Flexy.jpg\|313x313px\|thumb\|SoMakeItMini 2 with Flexystruder\|alt=]]~~
	*Model: Lulzbot Mini		*Model: Lulzbot Mini
	*Print Volume: 152x152x158mm		*Print Volume: 152x152x158mm
Line 26:		Line 25:

	===SMI TAZ 01===		===SMI TAZ 01===
	[[File:Lulzbot Taz 6 webcam.jpg\|alt=SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam\|thumb\|~~315x315px~~\|SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam]]		[[File:Lulzbot Taz 6 webcam.jpg\|alt=SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam\|thumb\|320x320px\|SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam]]

	*Model: Lulzbot TAZ 6		*Model: Lulzbot TAZ 6
Line 38:		Line 37:
	*Status: Functional		*Status: Functional
	*has webcam fitted for print monitoring via [[Octoprint and OctoEverywhere\|Octoeverywhere]]		*has webcam fitted for print monitoring via [[Octoprint and OctoEverywhere\|Octoeverywhere]]
			[[File:Lulzbot Taz 6 E3D HS.jpg\|alt=SMI TAZ 02 with E3D hot end\|thumb\|320x320px\|SMI TAZ 02 with E3D hot end]]
	===SMI TAZ 02===		===SMI TAZ 02===
	~~[[File:Lulzbot Taz 6 E3D HS.jpg\|alt=SMI TAZ 02 with E3D hot end\|thumb\|315x315px\|SMI TAZ 02 with E3D hot end]]~~As per TAZ 01 except:		As per TAZ 01 except:
	*Nozzle size: 0.8mm Hardened steel		*Nozzle size: 0.8mm Hardened steel
	*Materials to print: as per TAZ 01 and Flexible, abrasive or high temp		*Materials to print: as per TAZ 01 and Flexible, abrasive or high temp
Line 60:		Line 59:
	* No Webcam		* No Webcam

	[[File:Lulzbot Taz 3.jpg\|thumb\|~~347x347px~~]]		[[File:Lulzbot Taz 3.jpg\|thumb\|300x300px\|alt=\|SMI TAZ 5]]

	=== SMI TAZ 5 ===		=== SMI TAZ 5 ===

Abrugsch: Added all the TAZs and photos

2022-10-13T13:20:26Z

Added all the TAZs and photos

@@ Line 8: / Line 8: @@
 * Nozzle size: 0.5mm
 * Materials to print: PLA, ABS*, PETG
-* Octoprint address: n/a
+* Octoprint address: http://octopi4 (ensure is attached/shared with SoMakeIt mini 2)
 * Slice with: [[Printing with Cura|Cura]]
 * Print with: direct from [[Printing with Cura|Cura]] or [[Octoprint and OctoEverywhere|Octoprint]]
@@ Line 14: / Line 14: @@
 === SoMakeIt Mini 2 (flexystruder) ===
-* Model: Lulzbot Mini
+===SMI TAZ 01===
-* Print Volume: 152x152x158mm
+[[File:Lulzbot Taz 6 webcam.jpg|alt=SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam|thumb|315x315px|SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam]]
-* Bed Surface: Glass
-* nozzle size: 0.5mm
+*Model: Lulzbot TAZ 6
-* materials to print: flexible filament, e.g. TPU and ninjaflex
+*Print Volume: 280x280x250mm
-* Octoprint address: n/a
+*Bed Surface: PEI
-* Slice with: [[Printing with Cura|Cura]]
+*Nozzle size: 0.5mm
-* Print with: direct from [[Printing with Cura|Cura]] or [[Octoprint and OctoEverywhere|Octoprint]]
+*Materials to print: PLA, ABS*, PETG
-* Status: Under investigation
+*Octoprint address: http://octopi1
-{ToDo - Taz 6 details. Taz 6 HS details, cerberus, printer photos}
+==ToDo==

Abrugsch: fixed links to cura page to be internal links rather than external ones. Added octoprint page links

2022-10-05T15:16:18Z

fixed links to cura page to be internal links rather than external ones. Added octoprint page links

← Older revision		Revision as of 15:16, 5 October 2022
Line 9:		Line 9:
	* Materials to print: PLA, ABS*, PETG		* Materials to print: PLA, ABS*, PETG
	* Octoprint address: n/a		* Octoprint address: n/a
	* Slice with: [~~https://wiki.somakeit.org.uk/index.php/~~Printing~~%20with%20Cura~~ Cura]		* Slice with: [[Printing with Cura\|Cura]]
	* Print with: [~~https://wiki.somakeit.org.uk/index.php/~~Printing~~%20with%20Cura~~ Cura]		* Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]
	* Status: Functional		* Status: Functional

Line 21:		Line 21:
	* materials to print: flexible filament, e.g. TPU and ninjaflex		* materials to print: flexible filament, e.g. TPU and ninjaflex
	* Octoprint address: n/a		* Octoprint address: n/a
	* Slice with: [~~https://wiki.somakeit.org.uk/index.php/~~Printing~~%20with%20Cura~~ Cura]		* Slice with: [[Printing with Cura\|Cura]]
	* Print with: [~~https://wiki.somakeit.org.uk/index.php/~~Printing~~%20with%20Cura~~ Cura]		* Print with: direct from [[Printing with Cura\|Cura]] or [[Octoprint and OctoEverywhere\|Octoprint]]
	* Status: Under investigation		* Status: Under investigation

	{ToDo - Taz 6 details. Taz 6 HS details, cerberus, printer photos}		{ToDo - Taz 6 details. Taz 6 HS details, cerberus, printer photos}

Abrugsch: added a few printers with a rough details template. more printers need to be added

2022-10-03T14:41:04Z

added a few printers with a rough details template. more printers need to be added

New page

== Printer Models ==

=== SoMakeIt Mini 1 ===

* Model: Lulzbot Mini
* Print Volume: 152x152x158mm
* Bed Surface: PEI
* Nozzle size: 0.5mm
* Materials to print: PLA, ABS*, PETG
* Octoprint address: n/a
* Slice with: [https://wiki.somakeit.org.uk/index.php/Printing%20with%20Cura Cura]
* Print with: [https://wiki.somakeit.org.uk/index.php/Printing%20with%20Cura Cura]
* Status: Functional

=== SoMakeIt Mini 2 (flexystruder) ===

* Model: Lulzbot Mini
* Print Volume: 152x152x158mm
* Bed Surface: Glass
* nozzle size: 0.5mm
* materials to print: flexible filament, e.g. TPU and ninjaflex
* Octoprint address: n/a
* Slice with: [https://wiki.somakeit.org.uk/index.php/Printing%20with%20Cura Cura]
* Print with: [https://wiki.somakeit.org.uk/index.php/Printing%20with%20Cura Cura]
* Status: Under investigation

{ToDo - Taz 6 details. Taz 6 HS details, cerberus, printer photos}