Metal bender: Difference between revisions

From SoMakeIt
Jump to navigation Jump to search
(Added a stub page on the metalbender)
 
No edit summary
 
Line 1: Line 1:
{{Infobox tool
| type = Fabrication
| manufacturer = So Make It
| model = 001
}}
The metal bender lives on the metalworking bench in the workshop at the back with the two handles in a holder on the wall above it. The metalbender in the space is a custom built tool.
The metal bender lives on the metalworking bench in the workshop at the back with the two handles in a holder on the wall above it. The metalbender in the space is a custom built tool.



Latest revision as of 19:51, 16 September 2024

Metal bender
TypeFabrication
ManufacturerSo Make It
Model001


The metal bender lives on the metalworking bench in the workshop at the back with the two handles in a holder on the wall above it. The metalbender in the space is a custom built tool.

Usage

The metal bender fastens to the front of the metalworking bench using four bolts at the corners, these bolts live in the metalworking bench. The metal to be bent is secured down by the top plate using two bolts to either end the handles are then used to lift the front section to bend the metal. The front plates depth prevents doing zigzag bends too close to one another.