Harrison M300 Lathe
Jump to navigation
Jump to search
 | This tool requires an induction. Induction information can be found at https://somakeit.org.uk/inductions-and-processes/ |
| Type | Machine Tools |
|---|---|
| Manufacturer | Harrison |
| Model | M300 |
The Harrison M300 lathe is a metalworking lathe which we have owned for several years. It has a fairly rigorous induction, which requires less experienced lathe users to be supervised for a while before they can use the machine unsupervised.
Maintenance and Inspection
Regular Maintenance
- Oil levels should be checked and oil should be added to each oiling point for every day of use.
- All swarf and debris must be cleaned up at the end of each session.
- All tooling must be put away in its designated place at the end of each session.
- The lathe bench must remain clean and tidy at all times.
- All lathe tools must be kept sharp - please report if we are low on tooling, or
- Keep the lathe and tooling clean using blue tissue roll and a brush.
Inspections
The superusers regularly inspect the machine for signs of wear and tear, along with keeping the oil levels topped up.