Octoprint and OctoEverywhere: Difference between revisions

From SoMakeIt
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
Octoprint is a web-based print manager that runs from a connected Raspberry pi. Currently all of the Taz 6's and one Mini has an associated pi, and one of the Taz 6 pi's has a webcam and is connected to OctoEverywhere for remote monitoring of print jobs.


===Upload to Octoprint===
Connecting to an octopi (Octoprint on a pi) is as simple as pointing a web browser to the appropriate octopi instance. usually in the form of https://octopi1 (replacing the 1 for the number of the octopi instance as written on the side of the pi attached to the printer you want to use e.g. octopi2, octopi3 etc.)
 
==Upload to Octoprint==
open a web browser and navigate to http://octopi1 (or whichever octopi is on your printer) You may need to log in to upload, in which case use the same user and password as the space WiFi.  
open a web browser and navigate to http://octopi1 (or whichever octopi is on your printer) You may need to log in to upload, in which case use the same user and password as the space WiFi.  


Line 9: Line 12:
You can monitor and stop/start the print from the interface and if a webcam is attached, take progress pics
You can monitor and stop/start the print from the interface and if a webcam is attached, take progress pics


=== OctoEverywhere ===
== OctoEverywhere ==
Use the following link to monitor the printer remotely:
Use the following link to monitor the printer remotely:


https://octoeverywhere.com/live/xaL4JUMwR2?
https://oe.ink/l/ILk3a5BVk8?


[TODO: More detail]
[TODO: More detail]

Latest revision as of 10:07, 30 October 2022

Octoprint is a web-based print manager that runs from a connected Raspberry pi. Currently all of the Taz 6's and one Mini has an associated pi, and one of the Taz 6 pi's has a webcam and is connected to OctoEverywhere for remote monitoring of print jobs.

Connecting to an octopi (Octoprint on a pi) is as simple as pointing a web browser to the appropriate octopi instance. usually in the form of https://octopi1 (replacing the 1 for the number of the octopi instance as written on the side of the pi attached to the printer you want to use e.g. octopi2, octopi3 etc.)

Upload to Octoprint

open a web browser and navigate to http://octopi1 (or whichever octopi is on your printer) You may need to log in to upload, in which case use the same user and password as the space WiFi.

Octo1.png

Once logged in, check that the attached printer is switched on and click "Connect" Upload your .gcode file, select it from the file list and once the printer status is happy, click print.

You can monitor and stop/start the print from the interface and if a webcam is attached, take progress pics

OctoEverywhere

Use the following link to monitor the printer remotely:

https://oe.ink/l/ILk3a5BVk8?

[TODO: More detail]