3D Printer - LulzBot Mini
|3D Printer - LulzBot Mini|
|Location||Location:So Make It|
|Owner||So Make It|
LulzBot donated two LulzBot Minis to So Make It, these are warranty return units that we have repaired. They are best used to print ABS.
How to Use
How To Print
If you need to stop The Printer
If you are unsure, just turn the Power Supply off and look for someone who can help. Don't leave the hot nozzle touching the bed if you can avoid it.
There is a monthly maintenance check-list printed in the space, source is here: https://github.com/somakeit/operations/raw/master/Printer%20Service%20Schedules/LulzBot%20Mini%20Service%20Schedule.ods
Print Surface: Heated Borosilicate glass bed covered with PET film
Print Area: 152mm x 152mm x 158mm (6in x 6in x 6.2in)
Print Volume: 3,650 cm3 (223 in3) of usable space
Top Print Speed: 275mm/sec (10.8in/sec) at 0.18 layer height
Print Tolerance: 0.1mm (0.0039in) in X and Y axes. Z axis is dependent on layer thickness
Layer Thickness: From 0.05mm to 0.50mm (0.002in - 0.020in)
Supported Materials: ABS, HIPS..
Usable Filament Sizes: standard 3mm (0.1in)
Overall Dimensions: 435mm x 340mm x 385mm (17.1in x 13.4in x 15.2in)
Weight: 8.55kg (18.85lbs)
Power Requirements: 100 - 240 VAC with auto-switching power supply
Temperature: Maximum operating temperature (Extruder), 300C
Temperature: Maximum operating temperature (Heated Bed), 120C