3D Printers Models

FDM Printer Models

SoMakeItMini 2 with Flexystruder

SoMakeIt Mini 1

• Model: Lulzbot Mini
• Print Volume: 152x152x158mm
• Bed Surface: PEI
• Nozzle size: 0.5mm
• Materials to print: PLA, ABS*, PETG
• Octoprint address: http://taz4 (ensure is attached/shared with SoMakeIt mini 2)
• Slice with: Cura
• Print with: direct from Cura or Octoprint
• Status: Stored - Minis not in active use since arrival of resin printer

SoMakeIt Mini 2 (flexystruder)

• Model: Lulzbot Mini
• Print Volume: 152x152x158mm
• Bed Surface: Glass
• nozzle size: 0.5mm
• materials to print: flexible filament, e.g. TPU and ninjaflex
• Octoprint address: http://taz4 (ensure is attached/shared with SoMakeIt mini 1)
• Slice with: Cura
• Print with: direct from Cura or Octoprint
• Status: Under investigation

SMI TAZ 01

SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam

• Model: Lulzbot TAZ 6
• Print Volume: 280x280x250mm
• Bed Surface: PEI
• Nozzle size: 0.5mm
• Materials to print: PLA, ABS, PETG
• Enclosure for better printing of ABS and other environment temperature sensitive materials
• Octoprint address: http://taz1
• Slice with: Cura
• Print with: direct from Cura, SDCard or Octoprint
• Status: Functional
• has webcam fitted for print monitoring via Octoeverywhere

SMI TAZ 02 with E3D hot end

SMI TAZ 02

As per TAZ 01 except:

• Nozzle size: 0.8mm Hardened steel
• Materials to print: as per TAZ 01 and Flexible, abrasive or high temp
• Octoprint Address: http://taz2
• No webcam

E3D hot end close up

SMI TAZ 3 and 4 are both standard Lulzbot TAZ 6's

SMI TAZ 03

As Per TAZ 01 except:

• Octoprint address: http://taz3
• No Webcam

SMI TAZ 04

As Per TAZ 01 except:

• Octoprint address: http://taz4
• No Webcam

SMI TAZ 5

SMI TAZ 5

• Model: Lulzbot TAZ 3
• Print Volume: 280x280x250mm
• Bed Surface: PEI
• Nozzle size: 0.5mm [confirmation needed]
• Materials to print: PLA, ABS*
• Octoprint address: n/a
• Slice with: Lulzbot Cura 21.08, slic3r, Prusa slicer
• Print with: SDCard
• Status: Functional [confirmation needed]

SLA (Resin) Printer

Elegoo Mars and wash/cure station

• Model: Elegoo Mars 2P
• Print Volume: 129x80x160mm
• Bed Surface: LCD+FEP
• XY Resolution: 0.05mm(1620*2560)
• Materials to print: Liquid Resin
• Octoprint address: n/a
• Slice with: Chitubox on the Space PC
• Print with: USB Stick
• Status: Functional

Follow printing instructions here

ToDo

cerberus