3D Printers Models: Difference between revisions
Jump to navigation
Jump to search
m (tweak to photo sizes and positions) |
(added section for resin printer) |
||
| Line 1: | Line 1: | ||
== Printer Models == | == FDM Printer Models == | ||
[[File:Lulzbot Mini Flexy.jpg|320x320px|thumb|SoMakeItMini 2 with Flexystruder|alt=]] | [[File:Lulzbot Mini Flexy.jpg|320x320px|thumb|SoMakeItMini 2 with Flexystruder|alt=]] | ||
=== SoMakeIt Mini 1 === | === SoMakeIt Mini 1 === | ||
| Line 11: | Line 11: | ||
* Slice with: [[Printing with Cura|Cura]] | * Slice with: [[Printing with Cura|Cura]] | ||
* Print with: direct from [[Printing with Cura|Cura]] or [[Octoprint and OctoEverywhere|Octoprint]] | * Print with: direct from [[Printing with Cura|Cura]] or [[Octoprint and OctoEverywhere|Octoprint]] | ||
* Status: | * Status: Stored - Minis not in active use since arrival of resin printer | ||
=== SoMakeIt Mini 2 (flexystruder) === | === SoMakeIt Mini 2 (flexystruder) === | ||
| Line 31: | Line 31: | ||
*Bed Surface: PEI | *Bed Surface: PEI | ||
*Nozzle size: 0.5mm | *Nozzle size: 0.5mm | ||
*Materials to print: PLA, ABS | *Materials to print: PLA, ABS, PETG | ||
*Enclosure for better printing of ABS and other environment temperature sensitive materials | |||
*Octoprint address: http://octopi1 | *Octoprint address: http://octopi1 | ||
*Slice with: [[Printing with Cura|Cura]] | *Slice with: [[Printing with Cura|Cura]] | ||
| Line 72: | Line 73: | ||
*Print with: SDCard | *Print with: SDCard | ||
*Status: Functional [confirmation needed] | *Status: Functional [confirmation needed] | ||
== SLA (Resin) Printer == | |||
=== Elegoo Mars and wash/cure station === | |||
==ToDo== | ==ToDo== | ||
cerberus | cerberus | ||
Revision as of 10:39, 22 February 2023
FDM Printer Models
SoMakeIt Mini 1
- Model: Lulzbot Mini
- Print Volume: 152x152x158mm
- Bed Surface: PEI
- Nozzle size: 0.5mm
- Materials to print: PLA, ABS*, PETG
- Octoprint address: http://octopi4 (ensure is attached/shared with SoMakeIt mini 2)
- Slice with: Cura
- Print with: direct from Cura or Octoprint
- Status: Stored - Minis not in active use since arrival of resin printer
SoMakeIt Mini 2 (flexystruder)
- Model: Lulzbot Mini
- Print Volume: 152x152x158mm
- Bed Surface: Glass
- nozzle size: 0.5mm
- materials to print: flexible filament, e.g. TPU and ninjaflex
- Octoprint address: http://octopi4 (ensure is attached/shared with SoMakeIt mini 1)
- Slice with: Cura
- Print with: direct from Cura or Octoprint
- Status: Under investigation
SMI TAZ 01
- Model: Lulzbot TAZ 6
- Print Volume: 280x280x250mm
- Bed Surface: PEI
- Nozzle size: 0.5mm
- Materials to print: PLA, ABS, PETG
- Enclosure for better printing of ABS and other environment temperature sensitive materials
- Octoprint address: http://octopi1
- Slice with: Cura
- Print with: direct from Cura, SDCard or Octoprint
- Status: Functional
- has webcam fitted for print monitoring via Octoeverywhere
SMI TAZ 02
As per TAZ 01 except:
- Nozzle size: 0.8mm Hardened steel
- Materials to print: as per TAZ 01 and Flexible, abrasive or high temp
- Octoprint Address: http://octopi2
- No webcam
SMI TAZ 03
As Per TAZ 01 except:
- Octoprint address: http://octopi3
- No Webcam
SMI TAZ 04
As Per TAZ 01 except:
- Octoprint address: http://octopi4
- No Webcam
SMI TAZ 5
- Model: Lulzbot TAZ 3
- Print Volume: 280x280x250mm
- Bed Surface: PEI
- Nozzle size: 0.5mm [confirmation needed]
- Materials to print: PLA, ABS*
- Octoprint address: n/a
- Slice with: Lulzbot Cura 21.08, slic3r, Prusa slicer
- Print with: SDCard
- Status: Functional [confirmation needed]
SLA (Resin) Printer
Elegoo Mars and wash/cure station
ToDo
cerberus