3D Printers Models

From SoMakeIt
Revision as of 13:25, 13 October 2022 by Abrugsch (talk | contribs) (tweak to photo sizes and positions)
Jump to navigation Jump to search

Printer Models

SoMakeItMini 2 with Flexystruder

SoMakeIt Mini 1

  • Model: Lulzbot Mini
  • Print Volume: 152x152x158mm
  • Bed Surface: PEI
  • Nozzle size: 0.5mm
  • Materials to print: PLA, ABS*, PETG
  • Octoprint address: http://octopi4 (ensure is attached/shared with SoMakeIt mini 2)
  • Slice with: Cura
  • Print with: direct from Cura or Octoprint
  • Status: Functional

SoMakeIt Mini 2 (flexystruder)

  • Model: Lulzbot Mini
  • Print Volume: 152x152x158mm
  • Bed Surface: Glass
  • nozzle size: 0.5mm
  • materials to print: flexible filament, e.g. TPU and ninjaflex
  • Octoprint address: http://octopi4 (ensure is attached/shared with SoMakeIt mini 1)
  • Slice with: Cura
  • Print with: direct from Cura or Octoprint
  • Status: Under investigation

SMI TAZ 01

SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam
SMI TAZ 01 Lulzbot TAZ 6 with monitoring webcam
  • Model: Lulzbot TAZ 6
  • Print Volume: 280x280x250mm
  • Bed Surface: PEI
  • Nozzle size: 0.5mm
  • Materials to print: PLA, ABS*, PETG
  • Octoprint address: http://octopi1
  • Slice with: Cura
  • Print with: direct from Cura, SDCard or Octoprint
  • Status: Functional
  • has webcam fitted for print monitoring via Octoeverywhere
SMI TAZ 02 with E3D hot end
SMI TAZ 02 with E3D hot end

SMI TAZ 02

As per TAZ 01 except:

  • Nozzle size: 0.8mm Hardened steel
  • Materials to print: as per TAZ 01 and Flexible, abrasive or high temp
  • Octoprint Address: http://octopi2
  • No webcam
E3D hot end close up
SMI TAZ 4. a standard Lulzbot TAZ 6
SMI TAZ 3 and 4 are both standard Lulzbot TAZ 6's

SMI TAZ 03

As Per TAZ 01 except:

SMI TAZ 04

As Per TAZ 01 except:

SMI TAZ 5

SMI TAZ 5

  • Model: Lulzbot TAZ 3
  • Print Volume: 280x280x250mm
  • Bed Surface: PEI
  • Nozzle size: 0.5mm [confirmation needed]
  • Materials to print: PLA, ABS*
  • Octoprint address: n/a
  • Slice with: Lulzbot Cura 21.08, slic3r, Prusa slicer
  • Print with: SDCard
  • Status: Functional [confirmation needed]

ToDo

cerberus